In short: Park bench No. 14 is a long bench made of solid oak with armrests, a wide seat and a back formed by a curved top rail and eleven vertical slats. The legs are decorated with carved scrolls, and the light finish brings out the oak grain. The length and finish are agreed individually with each customer.
A park bench on a garden path
In the photo the bench stands on a lawn in an autumn garden. Behind it grow dense coniferous shrubs, farther off birches and other trees, and in the distance a brown wooden fence can be seen. Oak leaves are scattered on the grass. In front of the bench lies a flat stone, like a path slab leading straight to the seat.
This view shows well what such a bench is for. It is not a terrace piece by a table but a standalone resting place in a garden, a park or a farmstead yard. You can sit on it to rest after work, to admire the garden or to chat with a neighbor. Because the bench is long, several people can sit on it comfortably at the same time.
The coniferous backdrop gives the bench coziness: a living green wall covers your back, so you feel sheltered when sitting. That way a park bench becomes a kind of garden room under the open sky.
The stone slab in front of the bench is a good idea too. It keeps the grass underfoot from being trampled, and on a rainy day lets you walk up and sit down without getting your shoes wet. It is worth repeating this solution in your own yard if the bench will stand on a lawn.
The autumn photo shows an advantage of a light finish too. When dark green conifers and a gray sky dominate around, a honey-colored bench seems to light up the garden. It is visible from afar and invites you to come over. In summer the same bench goes with blooming flower beds, and in winter, covered with snow, it reminds you where you will be able to sit again in spring.
A back with a curved rail and slats
The top of the back is a wide board whose upper edge is gently curved: highest in the middle and sloping down to the sides. Its lower edge undulates too, so the board looks like a soft arch. The oak rings and natural knot marks are visible in it.
Eleven vertical slats are fitted between this rail and the lower strip. They are spaced evenly, so the back looks rhythmic and light. You can see the greenery behind the bench through the gaps, and when you lean back you feel several supports and not one hard plane.
A back like this has a practical benefit. Rainwater runs through the gaps, and the wood dries quickly. On a hot day a breeze passes through the slats, so your back does not get hot. Outdoors this solution lasts longer than a solid back, in whose corners moisture collects.
The curved top rail holds the shoulders comfortably when you lean back. Because it is wide, you can also lean on it with an elbow when turning toward the person sitting next to you.
Armrests and a wide seat
Armrests are installed at both ends of the bench: flat, thick boards on sturdy posts. Their front ends project forward, so it is convenient to rest your arms or a cup on them. Armrests also help you sit down and stand up, which matters especially for older people.
The seat is wide, made of thick boards, and its front corners are chamfered and rounded. The edge of the seat projects slightly beyond the armrest posts, so from the front the bench looks massive and sturdy. The rounded edges do not press on the backs of your knees and do not catch on clothing.
A bench with armrests has one more advantage: it clearly defines the spot. People sitting at the ends have support at their side, so it is more comfortable to sit on such a bench than on a plain bench without armrests, from the edge of which you sometimes want to slide off.
Outdoor cushions also lie well on the wide seat. If the bench is used often, for example in a farmstead yard where guests spend long evenings, the cushions can be kept nearby and brought out only when they are needed. That way they do not get soaked with dew, and the wood under them stays dry.
Legs with carved scrolls
Each end of the bench has a pair of legs. The front leg under the seat is carved with a scroll, a round, inward-curling ornament recalling the volutes of old furniture. Further down the leg narrows and curves slightly, so the bench looks graceful, although it is massive.
The rear legs slope backward and support the bench from behind. This position of the legs keeps the bench from tipping backward when someone leans hard on the back. The widely splayed legs hold the bench steady on a lawn too.
The scrolls are the detail that keeps the bench from looking like an ordinary plank product. They recall the old style of a park or manor garden and suit farmsteads, rural tourism sites, church yards and manor grounds very well.
Because the scrolls are carved by hand, they are not exactly identical at the two ends of the bench. The oak rings run differently in each leg, so the ornament acquires liveliness. This is not a flaw but a sign of handwork, which is worth appreciating.
What the photo shows
| Feature | In the photo |
|---|---|
| A long seat for several people | Yes |
| Armrests | Yes, at both ends |
| A back of vertical slats | Yes, eleven |
| A curved top rail | Yes |
| Scrolls on the legs | Yes |
| Light, honey-colored finish | Yes |
For a shorter bench with a back of a wide board with a clear oak pattern, look at the outdoor bench with a backrest “Park 2” No. 19. If you need benches by a table, look at the oak outdoor furniture “Light” No. 1 and the garden table with benches “Medium” No. 3. You will find all the models in the section garden and outdoor furniture.
Where to put a long wooden bench
A long wooden bench needs a little space, so choose a spot where it will not block a path and will be visible from a distance. A few proven solutions:
- By a hedge or shrubs. A green backdrop gives coziness and shelter from the wind, as in this photo.
- By a path or a pond. The bench becomes a place to stop and enjoy the view. You will find ideas for a path or a bridge over water in the section wooden bridges and fences.
- By the wall or entrance of a house. It is convenient to sit down here to take off your shoes or wait for guests.
- In public spaces. In parks, yards, and by churches or schools, such a bench stands up to intensive use.
When choosing a place, think about the sun. On the eastern side of the garden it will be pleasant to drink morning coffee on the bench, and on the western side to watch the sunset. If the bench will stand in a meadow, put stone slabs or concrete tiles under the legs so that they do not sink and are not constantly damp.
In a larger garden or a park, several identical benches can be placed, for example along a path or in a circle around a flower bed. Benches in the same style create a tidy, well-thought-out look and let visitors rest anywhere in the garden. If you plan several benches, it is worth saying so right away when you call.
Care and ordering
An oak garden bench is durable, but once a season it is worth cleaning it and coating it with an oil made for exterior wood. Pay special attention to the bottoms of the legs, the ends of the seat boards and the tops of the armrests, since these places are most exposed to rain and sun. In winter it is best to carry the bench under a roof or cover it with a breathable cover.
If the bench stands near conifers, as in the photo, needles and resin often fall on it. They are best cleaned off immediately, before they stick to the surface. In autumn, sweep wet leaves off the seat: wood stays damp longer under them and dark stains may appear.
UAB “Laukbaldis” has worked since 1996 and, as the company states, was the first in Lithuania to start making this production. The furniture is made of solid oak by experienced craftsmen, so every bench has its own pattern of rings.
Call +370 687 25388 and quote No. 14. Tell us what length of bench you need, whether it will have armrests and which finish you like. The website shows only typical examples, so a park bench can be made to the dimensions of your site.
Before you call, measure the spot where the bench will stand and think about how many people will usually sit on it. If the bench is meant for a public space, such as a park or a school or community yard, say so too: then it is easier to choose the right length and a finish that will withstand frequent use. During the conversation you can also discuss whether the number of back slats and the scrolls on the legs should be the same as in the photo.
Frequently asked questions
How many people fit on park bench No. 14?
The bench is long, so several people can sit on it comfortably at the same time. The exact length can be chosen when you order.
Can the bench be ordered without armrests?
Yes, armrests are discussed when you order. Still, with armrests it is more comfortable to sit down, stand up and put down a cup.
How does this bench differ from Park 2 No. 19?
No. 14 is longer, its back is formed by eleven slats and a curved rail, and its legs are decorated with scrolls. No. 19 is shorter, with a wide back board and rounded ends of the armrests.
Can a park bench be placed on a lawn?
Yes, but it is worth putting stone or concrete slabs under the legs. That way the legs will not sink into the ground and will dry faster after rain.
How do I look after an oak bench?
Once a season, clean the bench and coat it with an oil made for exterior wood. In winter it is best to keep it under a roof.
How do I order park bench No. 14?
Call us and quote No. 14. We will agree on the length of the bench, the armrests and the finish.
