In short: “Terrace 3” No. 20 is an outdoor furniture set made of solid oak: a rectangular table of long planks, two benches with curved slatted backrests and two chairs at the ends of the table. The set suits family lunches in a yard, on a terrace or at a farmstead. The table size, the length of the benches, the number of chairs and the finish are agreed individually with each customer.
The outdoor furniture set “Terrace 3”: what is included
In the photo the set is arranged on a lawn on a sunny day. In the upper right corner the edge of a gravel road can be seen, and elsewhere only grass. The furniture was photographed from above and slightly from the side, so the tabletop, the bench seats and the chair backs are clearly visible.
The set has four parts: a table, two benches and two chairs. The benches stand along the long edges of the table, and the chairs at the ends. This arrangement is classic and convenient: a larger part of the family sits on the benches, and those at the ends have separate seats with backs.
All the furniture is coated with a warm shade of honey and brown, through which the oak rings and knots are clearly visible. The pattern is most noticeable on the tabletop and the bench seats, where the sun falls straight on the planks.
It matters that all the parts of the set are made in the same style. The ends of the planks are rounded, the backrests are curved, and the legs are wide and sturdy. So the furniture looks like one whole and not like items collected from different places.
A rectangular table on wide legs
The tabletop is made of several long planks laid along the table. Its corners are rounded and the ends of the planks are sanded, so you will not catch on a sharp corner at the table. Narrow gaps are left between the planks, through which rainwater runs off and the surface dries quickly.
The table is held up by two wide legs at the ends. Each is made of thick planks and widens toward the bottom, so the table rests firmly on the ground. Under the tabletop the legs are joined by a crossbeam, which keeps them from spreading and stiffens the whole structure.
Wide legs have a practical benefit too. The table does not sink into the lawn the way furniture on thin legs does, and neither the wind nor someone leaning on it moves it. In addition, legs at the ends of the table leave free room for the knees under the table: those sitting on the benches do not have to work around supports standing at the corners.
A large tabletop holds a lot: dishes for a family lunch, bowls of salad, pitchers of drinks, even a grill tray. It is a table at which it is convenient not only to eat but also to work, for example to sort berries or prepare vegetables.
Over time an oak tabletop acquires a patina: it lightens a little in the sun, and small marks may appear where dishes are put most often. This is natural, and for many people it only gives the furniture liveliness. If you want to refresh the surface, it can be sanded and coated with oil again.
Benches with curved slatted backrests
Both benches are identical. Their seats are made of four lengthwise slats with gaps, and the backrests of three horizontal slats curved in an arc. The curved shape follows the line of the back, so leaning back is comfortable and the backrest does not look angular.
The sides of the benches are curved legs, with a horizontal support board attached at the bottom like a foot. It spreads the weight of the bench over a larger area, so the bench stands steadily on a lawn too. Round metal caps can be seen at the fixing points.
Benches with backrests are a big advantage over plain benches without backrests. You can sit at the table for a long time, lean back after lunch, and children do not tip over backward. The slats of the benches have gaps, which let air move, so they dry quickly after rain or dew.
Several people can sit on one bench comfortably, so a family with children or a few friends can sit side by side. Benches have another advantage: when more people gather at the table, you can always slide along the bench and make room for one more. With chairs it is harder to do.
Two chairs at the ends of the table
The backs of the chairs are made of several horizontal slats, the top one rounded. Such a backrest matches the backrests of the benches, although it is straighter and taller. The seat of the chair consists of several slats, and the legs are joined by crossbars that give them strength.
Chairs at the ends of the table let you seat more people and create clear “host” seats. If there are more guests, the chairs can be pulled aside and another bench or more chairs added at the ends of the table: this can be discussed when you order.
Separate chairs are also convenient because they are easy to carry. In the evening you can carry a chair to a fire or a flower bed, and then bring it back to the table. Benches are too heavy for such moves, so chairs and benches in a set complement each other.
Chairs with backs are especially comfortable for older family members. It is easier to sit down on a chair than to swing your legs over a bench, and the back lets you lean comfortably during a long lunch. That is why the combination of chairs at the ends of the table and benches at the sides suits a company of different ages.
What the photo shows
| Feature | In the photo |
|---|---|
| Rectangular table with rounded corners | Yes |
| Wide table legs with a crossbeam | Yes |
| Benches with curved backrests | Yes, two |
| Chairs with slatted backs | Yes, two |
| Bench legs with a support board | Yes |
| Warm honey-and-brown finish | Yes |
You will find a set of a similar composition with a different backrest shape among the terrace furniture “Daisy 2” No. 7. If you like an oval table, look at the oval outdoor table with benches and chairs “Oval” No. 2, and a more massive solution is in the furniture for a gazebo “Medium” No. 18. You will find all the models in the section garden and outdoor furniture.
The table lists only what can be seen in the photo of this typical example. There are no cushions, tablecloth or umbrella: the furniture is shown as it is. This helps you better judge the shape and wood of the furniture itself, and everyone can choose the extras to their own taste.
How to arrange furniture in a yard or on a terrace
A table with benches and chairs takes up a fair amount of space, so it is worth planning it in advance. Around the table you have to leave room not only for the furniture but also for people, so that nobody has to squeeze against a fence or a wall when pulling out a chair or getting out from behind a bench.
- On a lawn the set looks natural, as in the photo. It is worth putting stone slabs under the legs so that the furniture does not sink.
- On a terrace or paving blocks the furniture stands level, and its legs dry quickly.
- In a gazebo the furniture is protected from rain and sun, so the finish lasts longer. You will find examples of suitable gazebos in the section wooden gazebos.
In a yard it is worth placing the table closer to the kitchen door or the grill, so you do not have to carry dishes far. If the garden has shade under a tree, it will be most pleasant to have lunch there in summer. Oak garden furniture goes well with both a brick and a wooden house.
If the yard is small, the set can be made smaller: put chairs in place of one bench, or push the table against a wall and leave one long side without a bench. Furniture like this adapts easily to the space, because the benches and chairs are separate, not joined to the table. When guests arrive, the furniture can be arranged around the table again.
Care and ordering
Once a season, clean the furniture and coat it with an oil made for exterior wood. Pay special attention to the ends of the tabletop planks, the support boards of the bench legs and the bottoms of the chair legs, because these places absorb the most moisture. In winter it is best to keep the furniture under a roof, and if that is not possible, cover it with a breathable cover.
UAB “Laukbaldis” has worked since 1996 and, as the company states, was the first in Lithuania to start making this production. The furniture is made of solid oak by experienced craftsmen, and the knots and natural bends of the wood make every set one of a kind.
Call +370 687 25388 and quote No. 20. Tell us how many people usually sit at the table, how many benches and chairs you need and which finish you like. The website shows only typical examples, so an outdoor furniture set can be adapted to your yard or terrace.
Before you call, measure the spot where the furniture will stand and think about whether you will need extra chairs for guests. If the furniture will be in a gazebo, measure its interior and the width of the entrance. These figures will help you choose a table length that leaves a comfortable passage around.
Frequently asked questions
What does outdoor furniture set No. 20 include?
The photo shows a rectangular table, two benches with backrests and two chairs. The composition of the set can be changed when you order.
Can I order more chairs instead of benches?
Yes, the number of benches and chairs is agreed individually. You can choose only chairs or only benches.
Why do the bench legs have a support board at the bottom?
The support board spreads the weight of the bench over a larger area. That is why the bench stands steadily on a lawn too.
Is this set suitable for a gazebo?
Yes, the set suits a gazebo if its interior is spacious enough. Before ordering, it is worth measuring the interior of the gazebo.
How do I look after oak garden furniture?
Once a season, clean the furniture and coat it with an oil made for exterior wood. In winter it is best to keep it under a roof.
How do I order outdoor furniture set No. 20?
Call us and quote No. 20. We will agree on the table size, the number of benches and chairs, and the finish.
